luglio 04, 2017 - Beneteau

Figaro Bénéteau 3 - The home straight!

Comunicato Stampa disponibile solo in lingua originale. 

The low-down on the yard

Between now and the end of July, the prototype will be launched for the #figarobeneteau3, whose construction is entering its completion phase within the Bénéteau Racing Division at the Nantes-Cheviré site. Indeed, all the pieces of the puzzle that make up the 9.75-metre monohull de- signed by the VPLP design office are en route for the yard, as orchestrated by Marc Vaillier, head of the programme within the Groupe Bénéteau. “The hull is structurally complete, explains the latter. We’re coming out of what has been a pivotal moment for us, which consisted of putting in place all the elements to accommodate the foils.We’ve received the parts from the various subcontrac- tors and their installation has taken time and precision. We have now put in place the guides and sockets, which will be used to slide the foils on, the latter, built at Multiplast, will arrive next week.”

The next steps

Now that the foil system is set up and the deck hardware is in position, the next major event will be fitting the deck, which will take place next week.
The other pieces of the jigsaw? The rudders are complete, the keel and its fin are nearly there, the mast left Lorima, in Lorient, on Monday, to be dressed at Sparcraft in La Rochelle, before being deli- vered on around 20 July, at the same time as the set of sails manufactured at North Sails. 

Filtro avanzato